Code check for Indonesia
Status: not available yet. sazeh does not check a building against the codes of Indonesia today. It applies one other national set of codes, so a model checked here is not checked against SNI 1726:2019, SNI 2847:2019 and SNI 1729:2020. This page exists so that engineers working in Indonesia can ask for them: a country is added when enough of them do.
The codes that govern
| Subject | Code |
|---|---|
| Seismic resistance of buildings | SNI 1726:2019 |
| Structural concrete | SNI 2847:2019 |
| Structural steel | SNI 1729:2020 |
These are national adaptations of ASCE 7-16, ACI 318-14 and AISC 360-16, so the checks are the same in structure as the US ones, with the edition and the national tables changed.
What a check would cover
- The seismic hazard of the site from the national map of the short-period and 1-second spectral accelerations.
- Seismic loading, the story drift limit and the irregularity checks.
- Concrete members and joints, including the strong column, weak beam ratio, and steel members.
- A calculation sheet in English, with Indonesian to follow if engineers ask for it.
Before this country can be added
An edition is the unit of work, not a country: the same concrete rules serve every country that adopts that edition of ACI 318, and the differences are in the factors and the tables. The national spectral map and the printed standards are needed to check the tables.
What sazeh does today
It analyses an ETABS model from its .e2k file and checks every member, joint and storey against one national set of codes, then returns a calculation sheet and a corrected model. The ETABS model check tool page says what is read and what is checked, and the limitations page says what is not verified.
Other countries
Request the codes of Indonesia
Tell us where to write. We do not add a country until engineers ask for it, and we write only about this request.
Upload your ETABS .e2k model and get the calculation sheet.
Start the calculation